Shutdown and recommissioning 85
8. Dispose of the water hose.
NOTICE!
Beware of the risk of infection.
To prevent infections, use a new hose when recommissioning the unit.
9. Remove the teat from the feeding box.
10. Dispose of the teat.
NOTICE!
Beware of the risk of infection.
To avoid infections, use a new teat when recommissioning the unit.
11. Disconnect the hose from the teat to the feeding box valve or the mixer beaker.
12. Dispose of the hose.
NOTICE!
Beware of the risk of infection.
To prevent infections, use a new hose when recommissioning the unit.
13. Disconnect the hose that runs from the drain channel to the mixer drain valve.
14. Dispose of the hose.
NOTICE!
Beware of the risk of infection.
To prevent infections, use a new hose when recommissioning the unit.
15. Seal the cable gland of the Ethernet connection with a dummy plug and close the antenna
connections using the locks.
NOTICE!
Moisture.
Moisture can enter the control box through the cable gland of the Ethernet connection and dam-
age it.
16. Clean the outside of the automatic feeder using a damp cloth. Clean all areas that are not
reached by the cleaning program.
To Next Page
Loading...
