Framery 2Q - Page 151

Framery 2Q Huddle
2. Place the black metal trims against the side walls. Do not install them with screws.
Note: Place the metal trim with the sticker at the back in the right-hand corner
of the pod and with the sticker outwards.
3. Install the back profiles of the cord ducts (2 pcs) onto the back wall with 3.5x16 screws
(10 pcs).
Push the back profiles against the black metal trims.
Note: Make sure that you use the ready-made holes.
Installation instructions
info@frameryacoustics.com
151