X20/X20S and Ethos v1.0.11 User Manual
This Special Function assigns haptic vibration
State
Enable or disable this Special Function.
Active Condition
The Special Function may be Always On, or activated by switch positions, function
switches, logic switches, trim positions or flight modes.
Duration
Sets the duration in seconds.
Strength
Select the strength of the haptic vibration, between 1 and 10. The default is 5.
Repeat
The haptic may be executed once, or repeated at the frequency entered here.
Action: Write Logs
State
Enable or disable this Special Function.
Active Condition
The Special Function may be Always On, or activated by switch positions, function
switches, logic switches, trim positions or flight modes.
Write Interval
The logs write interval is user adjustable between 100 and 500ms.
To Next Page
Loading...
