X20/X20S and Ethos v1.0.11 User Manual
Switches SA to SJ may be defined as:
None
Toggle (momentary)
2 POS
3 POS
This allows for switches to be swapped over, for example the toggle switch SH could be
swapped over with the 2 position switch SF. Note that it may no be possible to replace a
toggle or 2 position with a 3 position switch if the radio wiring does not allow for it.
Switches may also be renamed from the default names SA through SJ to custom names.
Note that these names will be global across all models.
Home Keymap
The [SYS], [MDL] and [DISP] (TELE on older models) home keys can be re-assigned to suit
the user. For the [SYS] and [MDL] keys only the long-press options may be re-assigned, but
for the [DISP] key both may be reassigned to one of the following options:
To Next Page
Loading...
