X20/X20S and Ethos v1.0.11 User Manual
Trainer Mode = Slave
Link Mode (Wireless Off/On)
The trainer link can be either via cable or wireless (BT). The cable should be a 3.5mm
mono audio lead.
Local Name
This is the local BT name that will be displayed in devices being connected. The default
name is FrSkyBT, but may be edited here.
Local Address
This is the local Bluetooth address of the radio.
Dist Address
Once a Bluetooth device has been found and linked, the remote device's Bluetooth
address is displayed here.
Channels Range
Selects which channel range is transferred to the master radio.
To Next Page
Loading...
