X20/X20S and Ethos v1.0.11 User Manual
Name
Allows the timer to be named.
Mode
The timer can count Up or Down.
Alarm/Start Value
If the timer has been set to count Up, the Start Value parameter sets the Alarm Value at
which the timer triggers the configured alerts.
If the timer has been set to count Down, the Alarm Value parameter sets the Start Value
from which the timer counts down. When it reaches zero, it triggers the configured alerts.
Countdown Mode
This setting determines whether the countdown alert is mute, or a beep or spoken value.
Haptic
Enables haptic feedback to signal that the timer has elapsed.
Countdown Start
The timer value from which the countdown alerts start.
Countdown Step
The interval at which countdown alerts are made.
To Next Page
Loading...
