X20/X20S and Ethos v1.0.11 User Manual
Extended Trims
Extended trims allows trims to cover the full stick range instead of +/- 25%. Care must be
taken with this option, as holding the trim tabs for too long might add so much trim as to
make your model unflyable.
Independent Trim per Flight Mode
If you are using Flight Modes, then this setting enables the relevant trim to be independent
for each flight mode, instead of being common to all flight modes.
Cross Trim
Cross trims can be set up for each trim stick, so you can nominate which trim switch to use
for each stick.
To Next Page
Loading...
