Fuji Xerox DocuPrint C3290 FS User Manual

Scanning to a USB Connected Computer
7-5
Scanning to a USB Connected Computer
Note: This procedure assumes you have Express Scan Manager installed on your computer. For more
information on Express Scan Manager, see
Express Scan Manager on page 3-3.
1. On the control panel, click the Scan button.
2. Use the Up Arrow to select
Computer (USB), and then press the OK button.
3. Select the file format:
a. Press the OK button.
b. Press the Up Arrow or Down Arrow button to select the format.
c. Press the OK button.
4. Press the Start button.
A DocuPrint C3290 FS dialog box will appear on your computer asking you which application to
launch to manage the scanned file.
5. Select DocuPrint C3290 FS Express Scan Manager, and then click OK.
The printer scans your documents to the output destination specified in Express Scan Manager.
See also:
Adjusting Scanning Options on page 7-18

Fuji Xerox DocuPrint C3290 FS Specifications

General

Brand	Fuji Xerox
Model	DocuPrint C3290 FS
Category	All in One Printer
Language	English