Installing the Printer Drivers
4-11
Windows 2000 or Later
To install the printer driver from the Software Pack CD-ROM:
1. Insert the CD-ROM into the computer’s CD-ROM drive. If the installer does not launch, do the
following:
a. Click Start, and then click Run.
b. In the Run window, type: <CD drive>:\SETUP.EXE.
2. Select your desired language from the list.
3. Select Install Printer Driver.
4. Select the installation method you want to use, and then follow the onscreen instructions.
Note: PrintingScout is a separate option from the printer driver. To install PrintingScout, use the Software
Pack CD-ROM.
Mac OS X, Version 10.2 and Higher
Set up your printer using Bonjour (Rendezvous), create a desktop USB connection, or use an LPD/LPR
connection for Mac OS X, version 10.2 and higher.
Mac OS X, Version 10.2 and 10.3
To install the printer driver from the Software Pack CD-ROM:
1. Insert the CD-ROM into the CD-ROM drive and select the VISE installer to install the printer
software.
2. When installation is complete, select one of the following options:
■ Open the Print Center utility for Mac OS X, version 10.2.x.
■ Open the Printer Setup Utility for Mac OS X, version 10.3.x.
Note: To locate utilities on the Macintosh hard drive, open the Applications folder, and then open the
Utilities folder.
3. Confirm that the first drop-down menu is set to Bonjour (Rendezvous).
4. Select the printer in the window.
5. Select Fuji Xerox from the list of manufacturers in the lower drop-down menu.
6. Select the appropriate printer model from the list of available devices.
7. Click the Add button.
To Next Page
Loading...
Need help?
General
