Printing on Specialty Media
5-23
Printing on Specialty Media
This section includes:
■ Printing Transparencies on page 5-23
■ Printing Envelopes on page 5-26
■ Printing Labels on page 5-29
■ Printing Glossy Paper on page 5-34
■ Printing Custom Size or Long Paper on page 5-39
Printing Transparencies
Transparencies can only be printed from Tray 1 (MPT). They should be printed on one side only. For best
results, use only recommended Fuji Xerox transparencies.
To order paper, transparencies, or other specialty media, contact Fuji Xerox local Representative Office or
Authorised Dealers.
Guidelines
■ Remove all paper before loading transparencies in the tray.
■ Do not load more than 25 sheets in Tray 1 (MPT). Overloading the tray may cause the printer to jam.
■ Handle transparencies by the edges using both hands to avoid fingerprints and creases, which may
cause poor print quality.
■ Fan transparencies before loading in the paper tray.
This section explains how to print on transparencies.
To Next Page
Loading...
Need help?
General
