Adjusting Copying Options
6-9
Image Placement Adjustments
You can change the following image placement adjustment settings:
■ Printing Multiple Images on a Sheet (N-Up) on page 6-9
■ Printing Posters on page 6-9
■ Repeating Images on a Sheet on page 6-10
■ Centering the Image on page 6-10
■ Setting the Copy Margins on page 6-11
Printing Multiple Images on a Sheet (N-Up)
You can copy two original page images onto one side of a sheet of paper. The size of the images are
reduced proportionally to fit on the selected paper.
To select the N-Up option:
1. On the control panel, press the Copy button.
2. Select
N-Up, and then press the OK button.
3. Select one of the following options, and then press the OK button.
4. Press the Start button to begin copying.
Printing Posters
Note: The automatic document feeder cannot be used for this feature.
The poster option enables you to copy one original onto several pages that can be assembled into a poster.
The current reduce/enlarge setting is applied.
To select the poster option:
1. On the control panel, press the Copy button.
2. Select
Poster, and then press the OK button.
3. Select one of the following options:
■ Off: Turns off poster printing.
■ 2x2: Copies the image to 4 sheets of paper.
■ 3x3: Copies the image to 9 sheets of paper.
■ 4x4: Copies the image to 16 sheets of paper.
4. Press Start to begin copying.
Off
Copies one original page image onto one side of a sheet of paper.
Auto
Copies two original pages, reduces the images, and prints them on one
side of a sheet of paper.
ID Copy
Copies two original size images onto one side of a sheet of paper.
Manual
Reduces the two original images as specified in Reduce/Enlarge, and
prints them on one side of a sheet of paper.
To Next Page
Loading...
Need help?
General
