Loading Paper
5-12
Loading Paper in Trays 2 and 3
Use Trays 2 and 3 for a wide range of media including:
■ Plain paper
■ Thin card stock
■ Thick card stock
■ Glossy paper
■ Thick Glossy paper
■ Labels
See also:
Printing on Specialty Media on page 5-23
Loading Paper in Trays 2 and 3
This section describes how to load paper in the standard and optional paper trays. All trays are loaded the
same way.
Important: Do not remove the tray during printing. It may cause a paper jam.
1. Pull the tray out of the printer until it stops. Hold the tray with both hands, lift the front slightly, and
remove it from the printer.
To Next Page
Loading...
