Loading Paper
5-11
3. Insert all media facedown and top edge first into Tray 1 (MPT).
Note: Do not force the paper.
4. Slide the width guides until they rest lightly against the edge of the paper stack.
Note: Be careful not to bend the paper.
If Tray 1 (MPT) is configured for DriverSpecified, configure the paper size and type in the print driver.
When MPT Mode is set to Panel Specified, you need to set the paper type and size settings for the tray on
the control panel before printing.
See also:
Setting Paper Types and Sizes on page 5-8
To Next Page
Loading...
