Printing on Specialty Media
5-29
Printing Labels
Labels can be printed from all trays.
To order paper, transparencies, or other specialty media, contact Fuji Xerox local Representative Office or
Authorised Dealers.
See also:
About Paper on page 5-6
Guidelines
■ Do not use vinyl labels.
■ Print only on one side of the sheet of labels.
■ Do not use any sheet where labels are missing; it may damage the printer.
■ Store unused labels flat in their original packaging. Leave the sheets of labels inside the original
packaging until ready to use. Return any unused sheets of labels to the original packaging and reseal it.
■ Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions. Storing
them in extreme conditions may cause print-quality problems or cause them to jam in the printer.
■ Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and jam
the printer.
Printing Labels from Tray 1 (MPT)
1. Gently pull open the Tray 1 (MPT) cover.
To Next Page
Loading...
