Printer Specifications
1-17
Electrical Specifications
Electrical Specifications
■ 110-127 V~, 50/60 Hz, 9 A
■ 220-240 V~, 50/60 Hz, 4.5 A
The power voltage differs depending on the printer specification. Check the data plate located on the back
of the printer.
Power Consumption
■ AC 110 V:
■ Power Saver Mode 1 (Printer): 35 W or less
■ Power Saver Mode 2 (System): 18 W or less
■ Standby: less than 108 W or less (fuser on)
■ Continuous color or monochrome printing average: 500 W or less
■ AC 220 - 240 V:
■ Power Saver Mode 1 (Printer): 35 W or less
■ Power Saver Mode 2 (System): 17 W or less
■ Standby: less than 90 W (fuser on)
■ Continuous color or monochrome printing average: 500 W or less
This printer does not consume electric power when the power switch is turned off even if the printer is
connected to an AC outlet.
■ ENERGY STAR qualified printer:
Default time to Power Saver Mode 1 is 5 minutes.
Default time to Power Saver Mode 2 is 6 minutes after Power Saver Mode 1 begins.
Warm-Up Time
■ 30 seconds or less (when power is switched on, temperature: 22° C)
To Next Page
Loading...
