Control Panel Error Messages
10-30
Control Panel Error Messages
This section describes the messages displayed on the control panel.
Messages About Supplies
Message Condition/Reason/Action
Fuser Error
Error 010-351
Time to replace the fuser.
Replace the old fuser with a new one.
Fuser CRUM Error
Reseat Fuser
The fuser is not installed correctly or is not working correctly due to damage
or malfunction.
Reinstall the fuser.
Insert Fuser
Restart Printer
The fuser is not installed.
Install the fuser.
Remove Tape
XXX Cartridge
Sealing tape is still attached to the XXX print cartridge.
Remove the sealing tape from the displayed print cartridge.
Insert XXXX
Print Cartridge
Error 093-NNN
The XXX print cartridge is not installed correctly or is not working correctly
due to damage or malfunction.
Reinstall the print cartridge.
See Checking or Managing the Printer with CentreWare IS on page 11-5.
Insert
Transfer Unit
The transfer unit is not installed correctly or is not working correctly due to
damage or malfunction.
Reinstall the transfer unit.
CRUM Error
Error 094-330
Reseat Transfer Unit
The transfer unit need to be replaced.
Insert
Transfer Unit
The transfer unit is not installed.
Install the transfer unit.
X(xx) - CRUM Error
Error 093-9NN
Restart Printer.
The print cartridge needs to be replaced.
Replace the indicated print cartridge, either Yellow, Magenta, Cyan, or
Black.
Ready
Replace XXXX
Print Cartridge Soon.
The XXX print cartridge is nearly empty.
Purchase a new print cartridge.
See Checking or Managing the Printer with CentreWare IS on page 11-5.
Ready
Replace Fuser Soon
It is nearly time to replace the fuser.
Purchase a new fuser.
Ready
Replace Transfer Unit
Soon
It is nearly time to replace the transfer unit.
Purchase a new transfer unit.
To Next Page
Loading...
Need help?
General
