Loading Paper
5-10
Make sure of the following points to avoid any problems during printing:
■ Do not load different types of paper at the same time.
■ Use high quality paper for laser printers to print at high quality. See About Paper on page 5-6.
■ Do not remove or add paper to Tray 1 (MPT) when printing, or if there is any paper still in the tray.
Doing so may cause a paper jam.
■ Do not put any objects other than paper on Tray 1 (MPT). Also, do not push or force down Tray 1
(MPT).
■ Always load paper short-edge feed.
Note: Depending on the paper size, loading long-edge feed may be available for custom size paper.
To load paper in Tray 1 (MPT):
1. Gently pull open the Tray 1 (MPT) cover.
2. Slide the width guides to the edge of the tray. The width guides should be fully extended.
To Next Page
Loading...
Need help?
General
