Loading Paper
5-13
2. Slide the width guides to the edge of the tray. The width guides should be fully extended.
Note: When loading paper that is 210 mm (A4) wide, such as Letter-size or Legal-size paper, set the
tab on the side of the tray to the (A4) position.
3. Squeeze the green tab on the length guide, and then slide the tray until the arrow lines up with the
appropriate paper size. The guide clicks into place. The length guide extends beyond the edge of the
tray for paper that is longer than 297 mm.
4. Before loading the print media, flex the sheets back and forth, and then fan them. Straighten the edges
of the stack on a level surface.
To Next Page
Loading...
Need help?
General
