Configuring the Network Address
4-7
Using the Control Panel
To turn on/off either the DHCP or AutoIP protocol:
1. On the control panel, press the System button.
2. Select the
Admin menu, and then press the OK button.
3. Select the
Network Settings menu, and then press the OK button.
4. Select the
TCP/IP menu, and then press the OK button.
5. Select
Get IP Address, and then press the OK button.
Using CentreWare IS
To turn on/off the DHCP protocol:
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s Address field.
3. Select Properties.
4. Select the Protocols folder on the left navigation panel.
5. Select TCP/IP.
6. In the Get IP Address field, select the DHCP/Autonet option.
7. Click the Save Changes button.
To Next Page
Loading...
