62 Printer Connection and Software Installation
4 Select a connection method to the printer.
For the wireless connection, see "Configuring Wireless Connection Settings" on page 62.
For the USB connection, see "Configuring USB Connection Settings" on page 63.
For the Ethernet connection, see "Configuring Ethernet Connection Settings" on page 63.
Configuring Wireless Connection Settings
The installer software connects the printer and installs the required drivers and software.
The connection procedure varies depending on how your network and computer are set up.
1 Confirm that the printer is turned on and the status LED (Mobile) is blinking.
2 Click Wireless on the Select a connection Method screen.
3 Follow the instructions displayed on the screen.
• If the software detects your network and printer, the SSID and Printer Name will be displayed. Confirm the
SSID and Printer Name and then click Next.
• If the WPS setup screen is displayed, follow the steps displayed on the screen.
• In case the WPS button is not available on your router or you want to set up manually, click Manual settings
and follow the instructions displayed on the screen.
4 Click Finish to exit the wizard when the Ready to Print! screen appears. If necessary, click Print Test Page to
verify installation.
To Next Page
Loading...
Need help?
General
