Preparing your not ebook for use
Switching the notebook o n for the first time
Switchingonforthefirst time
We recommend that the notebook is supplied with power through
the mains adapter during this procedure.
When you switch your notebook on for the first time, the s upplied software is
installed and configured. Due to the fact that this installation procedure must not
be interrupted, you should set aside enough time fo r i t to be fully completed and
connect the notebook to the mains outlet using the mains adapter.
During installation, the notebook must only be rebooted w hen you are requested to do so!
You will be prompted to create a backup copy of the pre-installed operating system. This
backup copy can be used later to restore your notebook to its delivery configuration.
You can find information on how to resto re the ope rating system, drivers, manuals
and s pecial software in the Recovery Process manual.
Your operating system is pre
-installed on the hard disk to facilitate the procedure
when you use your notebook f
or the first tim e.
► Switch the notebook on (see "
Note book switching on", Pag e 11).
► During installation, follow the on-screen instructions.
Consult the operating system
manual if anything is unclear about the requeste d input data .
If a Windows operating syst e
m is installed on your notebook, you will find additional
information on the system a
s well as the drivers, help programs, updates, manuals, etc.
on your notebook, or you ca
n order it via our website (see "
Information sources", Page 4).
10 AMILO Notebook operating manual, edition 3