Working with the notebook
Removing the memory card
Memorycard
In order to protect your data, alwa ys follow the correct procedure
for removing the card outlined below.
You can stop the m emory card via the corresponding icon in the task bar:
► Left-click on the icon.
► Select the card you want to stop and remove.
► Press the Enter key.
Wait for the dialogue box which tells you that it is now safe to remove the m emory card.
1
2
► O n devices with card locking: Press
on the storage card (1).
Memorycard
The storage card is released and
can now be removed.
► Pull the storage card out of the slot (2).
Hard disk
Harddisk
The hard disk is the most important storage medium of your notebook. You can work
considerably faster and more efficiently if you copy applications and files from external data
carriers, such as CDs/DVDs or USB storage media, to your hard disk.
Second hard disk in RAID group (device-dependent)
RedundantAr rayofIndep endentDis ksRAID
Removal and installation of a second hard disk mu st only be performed by
authorised service agents of Fujitsu Siemens Computers GmbH. Unauth orised
removal and installation will invalidate your w arra nty.
For further information and addresses of our service partners, please
see "
http://www.fujitsu-siemens.com/support".
RAID (Redundant Array of Independent D isks, also: Disk Array) is a procedure for
combining two hard disks to create a logical unit.
A so-called disk array can be used advanta geously to improve performance or
alternatively to improve error tolera nce (data protection).
Error tolerance is fa cilitated by means of data redundancy. If one drive malfunctions,
a different d rive contains an exact copy of the data. This can prevent an opera ting
system from malfunctioning or data from being lost.
AMILO Notebook operating manual, edition 3 39
To Next Page
Loading...
Need help?
General
