Fujitsu Airstage J-II Series User Manual


SYSTEM DIAGRAM
z
Multiple remote control
Up to 4 remote controllers can be used to operate the indoor units.
Master
A
I.U.
Slave SlaveMaster
A B C
I.U.
SlaveMaster
A B
I.U.
Slave Slave SlaveMaster
A B C D
I.U.
A, B, C, D : Remote controller cable. (Refer to Chapter6. 4-4 for detail specications)
A≤1,640 ft. (500 m), A+B≤1,640 ft. (500 m), A+B+C≤1,640 ft. (500 m), A+B+C+D≤1,640 ft. (500 m).
NOTE:
Multiple installation method described above is prohibited to combine with UTY-RNKU (3 Wired
type) or UTY-RSKU (3 Wired type) or UTY-RHKU (3 Wired type) and UTY-RNRUZ1 (2 Wired
Type)
z
Group control
With a single remote controller, up to 16 units can be simultaneously operated.
Master
A
B C D E
I.U. I.U. I.U. I.U.
A, B, C, D, E : Remote controller cable. (Refer to Chapter6. 4-4 for detail specications)
A+B+C+D+E≤1,640 ft. (500 m).
- (05 - 59) -
CONTROL SYSTEM CONTROL SYSTEM

Fujitsu Airstage J-II Series Specifications

General

Brand	Fujitsu
Model	Airstage J-II Series
Category	Air Conditioner
Language	English