Fujitsu Airstage J-II Series User Manual


BUTTON NAME AND FUNCTION
● During address setting mode, indoor unit reject the any operation command from remote controller.
MODE button
START/STOP button
TIMER set (-) button
TIMER set (+) button
SET TEMP. "
p
" and "
q
" button
FAN button
Setting number
Function number
Refer to FUNCTION DETAILS
Refer to FUNCTION DETAILS
Switches between the setting number (bottom line)
and function number (top line)
Increases and decreases the displayed number
- Start the function setting mode
- Changes the display digits
Transmits function setting
Reconrmation of function setting.
Conrmation of function setting.
Indication of function number (the ten's place)
Indication of function number (the one's place)
Indication of setting number (0-9)
Long press ----- Switches between the function setting mode and
(3 sec more) the function setting complete mode.
Short press ----- Switches the indicator display
MANUAL
AUTO
OPERATION L AMP
IR RECEIVER UNIT
TIMER LAMP
FILTER L A MP
MANUAL/AUTO button
- (07 - 91) -
FUNCTION SETTING FUNCTION SETTING

Fujitsu Airstage J-II Series Specifications

General

Brand	Fujitsu
Model	Airstage J-II Series
Category	Air Conditioner
Language	English