Fujitsu Airstage J-II Series - Page 752


SWITCHING SELECTION OF ADDRESS SETTING MODE
3) With “Monitor Mode” screen displayed, press and hold the SET TEMP. “ ” button and FAN
“ ” button simultaneously for at least 2 seconds.
4) The Menu 1 screen is displayed. Press and hold the FAN “ ” button for at least 2 seconds.
Setting mode selection screen is displayed.
5) Press the SET TEMP. “ ” or SET TEMP. “ ” button to select F1 (Menu 2-F1) settings mode
or F2 (Menu 2-F2) settings mode.
F1: Initial settings mode F2: Maintenance settings mode
6) Press the “ ” button. Setting item selection screen is displayed. (Item No. is displayed.)
7) Select the item number to be set with the SET TEMP. “ ” or SET TEMP. “ ” button, and
press the “ ” button to switch to thesetting screen.
8) Select the “13” in Menu 2-F1 Settings. Then press the “ ” button.
- (07 - 105) -
FUNCTION SETTING FUNCTION SETTING