Fujitsu Airstage J-II Series - Page 789

2-21. DUCT STATIC PRESSURE SETTING

MODEL: ARUL4TLAV1

MODELS: ARUL7TLAV, ARUL9TLAV, ARUL12TLAV, ARUL14TLAV,
ARUL18TL AV

MODELS: ARUM24TLAV, ARUM30TLAV, ARUM36TLAV

MODELS: ARUH72TLAV1, ARUH96TLAV
Change the airow setting when the external static pressure is di󰀨erent than the default static
pressure.
Static pressure setting can be performed using: wireless remote controller, wired remote
controller, and simple remote controller.
How to set airow (external static pressure)

●
Wireless remote controller
Airow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-3. INDOOR UNIT (setting by wireless remote controller).

●
Wired remote controller
Airow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-4. INDOOR UNIT (setting by wired remote controller).

●
Simple remote controller
Airow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-5. INDOOR UNIT (setting by simple remote controller).

●
Wired remote controller (Touch panel)
Airow is set by function number 26 (static pressure).
Refer to "FUNCTION SETTING" and "FUNCTION DETAILS" in 2-6. INDOOR UNIT (setting
by wired remote controller [Touch panel]).

●
FAN PERFORMANCE CURVE
Refer to "7. FAN PERFORMANCE CURVE" in Chapter 4.
NOTE
● If airow is set incorrectly, unit may perform incorrectly; insu󰀩cient airow or condensate
carry-over (water leakage) are possible.
- (07 - 142) -
FUNCTION SETTING FUNCTION SETTING