Fujitsu Airstage J-II Series User Manual


INSTALLATION RESTRICTION OF ELECTRICITY METER
z
Functions that requires installation of electricity meter
Use an electricity meter having the following functions:
・
Electricity charge apportionment function
Install for operation using an electricity meter. (Operation without an electricity meter is also
possible.)
When using an electricity meter, an electricity meter must be installed for all the units which
perform apportionment calculation.
・
Peak cut control function (Only for System controller)
Installation of an electricity meter is essential.
・
Input Power graph display function (Only for System controller)
Installation of an electricity meter is essential.
[Installation example]
WhmWhm
Whm
Whm
Whm
Whm
Electricity meter
Outdoor unit group
Remote controller group
RB group
Electricity meter
connection range
“Units without electricity meter”
Function which uses an electricity
meter cannot be used.
- (07 - 159) -
FUNCTION SETTING FUNCTION SETTING

Fujitsu Airstage J-II Series Specifications

General

Brand	Fujitsu
Model	Airstage J-II Series
Category	Air Conditioner
Language	English