Fujitsu CT114 - Others; Certificate

CT114_Rev2
74
Maintenance Menu
Maintenance Information
General information and maintenance information on this equipment can be found in the
[Maintenance Information] menu.
Item
Description
Machine Type
Displays the Model of cleaver (eg. “CT114”
Serial Num.
Serial number of the cleaver.
Version
Current firmware version.
Blade Position
Cleave blade position, cleave count, blade life. Refer
to
“About Cleaver Counter” below for more
information
.
Cleave Count At Position
Cleave Count Of Blade
Cleave Count Of Machine
Last Authorized Service
The date of last authorized service.
Next Authorized Service
The scheduled date of next authorized service.
About Cleaver Counter
The cleaver automatically keeps track of the number of cleaves on both the cleaver blade
and the cleaver (machine) itself. The values are displayed as follows:
Blade Position:
Shows current blade position. The “Blade Position” can be changed to any position
between position 1 and position 20. If “Blade Replacement” is performed, the blade
position will be reset to position 1.
Cleave Count At Position
Shows cleave count at current blade position. If “Blade Replacement” is
performed, this counter will reset to 0.
Cleave Count Of Blade
Shows overall cleave count of blade. If “Blade Replacement” is performed, this
counter will reset to 0.
Cleave Count Of Machine
Shows Cleave Count of the machine. This counter cannot be reset.