CT114_Rev2
Safety Information
Thank you for purchasing Fujikura’s Large Diameter Optical Fiber Cleaver
In this instruction manual, the processes and procedures are doumented which should be
observed in order to use this product safely.
This cleaver has been designed for cleaving glass optical fibers and capillary tubes.
Cleaving should not be attempted on anything other than a glass optical fiber or a capillary
tube with this product
Read and understand all safety
instructions.
Ask our service centers for repair as
soon as possible.
Read this instruction manual carefully
before operating the machine.
Store this instruction manual in a safe
place.
The following symbols are used in this
instruction manual to indicate warning and
caution for safe use.
Learn and
understand the meanings of these
symbols.
WARNING! / CAUTION!
There is a possibility of death, serious
injury, or physical loss if this indication is
ignored
. Ignoring this indication is an
improper use of the machine.
PAY ATTENTION!
In general, a yellow triangle means the
associated caution should be observed.
Example:
PAY ATTENTION to hot surface!
DO NOT …!
Example:
DO NOT
disassemble!
DO
A blue circle with a white graphic inside
means the associated process is required
for safe operation
Example:
You must disconnect the plug!
ᴾ
Follow all safety instructions
Stop using it when it malfunctions
To Next Page
Loading...
Need help?
General
