Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

3.2.3 Installation and operation 30
3.2.4 Batteries 33
3.2.5 Working with optical disk drives (ODDs) and media 33
3.2.6 Laser information 35
3.2.7 Modules with Electrostatic-Sensitive Devices (ESD modules) 35
3.2.8 Transporting the server 37
3.2.9 Installing the server in the rack 38
3.2.10 Other important information 38
3.3 ENERGY STAR 39
3.4 CE conformity 39
3.5 FCC Class A Compliance Statement 40
3.6 Environmental protection 41
4 Basic hardware procedures 43
4.1 Using diagnostic information 43
4.1.1 Proceeding 43
4.1.2 Locating the defective server 43
4.1.3 Determining the error class 44
4.1.4 Locating the defective component 44
4.2 Shutting down the server 45
4.3 Disconnecting the power cord 46
4.4 Getting access to the component 48
4.4.1 Extending the server out of the rack 48
4.4.2 Removing the server from the rack 49
4.4.3 Removing the top cover 51
4.5 Reassembling 52
4.5.1 Installing the top cover 52
4.5.2 Installing the server in the rack 53
4.5.3 Sliding the server into the rack 55
4.6 Connecting the power cord 56
Content
Upgrade and Maintenance Manual RX1330 M4

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller