Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

▶
Select the Main menu.
▶
Under System T
ime and System Date specify the correct time and date.
By default, the system time set in the BIOS is RTC (Real Time Clock)
local time. If your IT infrastructure relies on universally accepted time
standards, set the System Time
to UTC (Universal Time,
Coordinated) instead. Greenwich Mean Time (GMT) can be
considered equivalent to UTC.
▶
Save your changes and exit the BIOS.
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
5.3.12 Viewing and clearing the System Event Log (SEL)
You can view the System Event Log (SEL) using the ServerView
Operations Manager or the iRMC S5 web interface.
You can clear the System Event Log (SEL) using the iRMC S5 web
interface.
You can collect logs using the Infrastructure Manager.
Viewing the SEL using the ServerView Operations Manager
▶
In ServerView Operations Manager Single System V
iew select
Maintenance from the Information / Operation menu.
▶
Under Maintenance select System Event Log.
▶
Select the message type(s) you want to display:
‐ Critical events
‐ Major events
‐ Minor events
‐ Informational events
Basic software procedures
RX1330 M4 Upgrade and Maintenance Manual 83

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller