Checking the label
▶
If available, check the label on the controller. Beside the part number
, you
may find the GUID address.
5.3.16.5 Looking for SAS addresses of SAS controllers for external
devices
There are several possible locations where these addresses can be found.
▶
Inform the customer about the new SAS address. The customer need the
new SAS address, especially when the server is connected to a Fujitsu
Storage ETERNUS system.
Using ServerView RAID Manager
▶
Start the ServerView RAID Manager and log in.
▶
Select the desired SAS controller.
In the General tab you can find data on the selected object including its SAS
address.
For more information, see the "ServerView Operations Manager - Server
Management" user guide and the "ServerView RAID Manager" user
guide.
5.3.17
Using the Chassis ID Prom Tool
The front panel (front panel module, front panel board or front panel on QRL)
contains the Chassis ID EPROM that stores the following system information:
–
server name and model
–
housing type
–
serial number
–
manufacturing data
Basic software procedures
RX1330 M4 Upgrade and Maintenance Manual 91
To Next Page
Loading...
