TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
147
6.2.3 Installing a PSU
Figure 65: Installing a PSU
Ê
Push the PSU into its slot (1) as far as it will go until the locking latch snaps
in place (2).
V CAUTION!
Ensure that the PSU properly engages in its slot and is locked in
position in order to prevent it from sliding out of the chassis during
transportation.
Ê
If applicable, fold down the handle on the PSU.
6.2.4 Concluding steps
Ê
"Connecting the power cord" on page 87
Ê
If applicable, configure the redundant power supply.
Ê
"Performing a fan test" on page 129
To Next Page
Loading...
