Fujitsu PRIMERGY RX2560 M2 - Removing the TFM; Installing the New TFM

330 Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2
Expansion cards and backup units
9.4.5.2 Removing the TFM
Figure 235: Disconnecting the FBU adapter cable from the TFM
Ê Disconnect the FBU adapter cable from the TFM.
Figure 236: Removing the TFM
Ê Remove the two screws (1).
Ê Remove the TFM (2).
I Note for replacing the TFM:
The two spacer bolts can remain on the RAID controller.
9.4.5.3 Installing the new TFM
Ê
Install the TFM onto the existing TFM spacer bolts as described in section
"Installing a TFM" on page 320.