84
Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2
Basic hardware procedures
4.5.2.4 Installing the side cover
I
Note for servers with the configuration up to 32x 2.5" HDD/SSD modules:
For this configuration the locking lever is positioned more in the middle.
It is not possible to use this top cover in other configurations.
Figure 33: Installing the side cover (tower server) (A)
Ê
Open the locking lever on the side cover.
Ê
Fit the side cover on the chassis, recessed by 2 cm.
To Next Page
Loading...
