EasyManua.ls Logo

Fujitsu PRIMERGY RX2560 M2 - Installing the Second 3.5-Inch HDD SAS Backplane

Fujitsu PRIMERGY RX2560 M2
568 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
233
Hard disk drive (HDD) / solid state drive (SSD)
7.3.13.4 Installing the second 3.5-inch HDD SAS backplane
Figure 147: Installing the second 3.5-inch HDD SAS backplane (A)
Ê
Fit the SAS backplane into the guide on the outer wall of the HDD bay (see
close-up) and lower it into the bottom rim.
Figure 148: Installing the second 3.5-inch HDD SAS backplane (B)
Ê
Ensure that the SAS backplane is properly seated into the bottom rim and
side guide (see arrows).

Table of Contents

Related product manuals