Fujitsu PRIMERGY RX2560 M2 - Concluding Steps; Upgrading from 8 X to 16 X 2.5-Inch HDD;SSD Configurations; Preliminary Steps

202 Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2
Hard disk drive (HDD) / solid state drive (SSD)
7.2.15.4 Concluding steps
Ê
"Installing the system fan holder" on page 94
Ê "Installing the system air duct" on page 92
Ê "Reassembling" on page 74
Ê "Connecting the power cord" on page 87
Ê "Switching on the server" on page 90
7.2.16 Upgrading from 8x to 16x 2.5-inch HDD/SSD
configurations
7.2.16.1 Preliminary steps
Ê
"Suspending BitLocker functionality" on page 111
Ê "Shutting down the server" on page 58
Ê "Disconnecting the power cord" on page 59
Ê "Getting access to the component" on page 61
Ê Remove all HDD/SSD modules as described in section "Removing 2.5-inch
HDD/SSD modules" on page 175.
Ê "Removing the system air duct" on page 91
Ê "Removing the system fan holder" on page 93
Upgrade and Repair Unit
(URU)
Hardware: 20 minutes
Tools:
Phillips PH2 / (+) No. 2 screw driver