Fujitsu PRIMERGY RX2560 M2 - Removing the SAS Expander Board; Concluding Steps

280 Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2
Hard disk drive (HDD) / solid state drive (SSD)
7.7.2.3 Removing the SAS expander board
Figure 195: Removing the SAS expander board
Ê Remove one screw (see circle).
Ê Push the SAS expander board in the direction of the arrow.
Ê Take off the SAS expander board from the expander holder.
7.7.2.4 Concluding steps
Ê
"Installing the system fan holder" on page 94
Ê "Installing the system air duct" on page 92
Ê "Reassembling" on page 74
Ê "Connecting the power cord" on page 87
Ê "Resuming BitLocker functionality" on page 136
Ê "Switching on the server" on page 90