TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
229
Hard disk drive (HDD) / solid state drive (SSD)
Figure 143: Installing the 3.5-inch HDD bay top cover (B)
Ê
Place the intrusion switch holder on the HDD bay top cover as shown (1).
Ê
Slide the intrusion switch holder under the front chassis rim as far as it will
go (2).
Figure 144: Installing the 3.5-inch HDD bay top cover (C)
Ê
Secure the HDD bay top cover to the chassis with five M3 x 4.5 mm screws
(see blue circles).
Ê
Secure the intrusion switch holder on the HDD bay top cover with one
M3 x 4.5 mm screw (see orange circle).
To Next Page
Loading...
