Fujitsu Primergy RX300 S3 Operating Manual

106 Operating manual RX300 S3
Index
display drifts 69
drive "dead" 71
drive defective 71
floppy disk cannot be read or
written 70
incorrect PCI board installed 72
MRL sensor illegally activated 72
no mouse pointer 69
power failure during enable
sequence 72
screen remains dark 68
screen shows flickering
stripes 69
server switches off 68
system does not boot 70
wrong date 70
wrong time 70
Error Correcting Code 13
Error Detection Code 13
error message
on screen 73
ESD (devices sensitive to electrostatic
discharge) 28
ESD-sensitive devices 28
external devices
connecting 47
F
fan
replace 88
fans
CPU 13
system 13
fault
display drifts 69
screen dark 69
screen shows flickering
stripes 69
system does not boot 70
features 9
flash EPROM 16
floppy disk
cannot be read or written 70
floppy disk drive
indicator 50, 51
G
GAM 60
Global Array Manager (GAM) 60
Global Error
indicator 50, 51, 54
graphics card 45
H
hard disk drive 11
carrier 77
handling 77
HDD module 77
hot-plug 77
indicator 51, 52
online replacing 87
HDD BUSY
indicator 50
HDD FAULT
indicator 50
HDD module
acclimatization time 80
carrier 80
dummy module 77
handling 77
hard disk drive 80
hot-plug 14
installing/removing 80
height units 38
hot-plug
fan 88
HDD module 77
PCI board 90
PCI slot 7
power supply unit 13, 45, 75
tape drive 12
hot-plug PCI
error indicator 56, 62, 72
power indicator 56, 62, 72
hot-plug PCI board
replacing 90
hot-plug PCI power indicator

Fujitsu Primergy RX300 S3 Specifications

General

Tcase	78 °C
Bus type	FSB
FSB Parity	Yes
Processor cache	4 MB
Processor cores	2
Processor model	5080
Processor series	Intel Xeon 5000 Series
Processor socket	LGA 771 (Socket J)
Processor threads	4
Processor codename	Dempsey
Motherboard chipset	Intel® 5000P
Processing Die size	162 mm²
Processor frequency	3.73 GHz
Processor cache type	L2
Processor lithography	65 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor front side bus	1066 MHz
Processor operating modes	64-bit
ECC supported by processor	No
Thermal Design Power (TDP)	130 W
Processor core voltage (AC)	1.25 - 1.40 V
CPU multiplier (bus/core ratio)	14
Number of Processing Die Transistors	376 M
Maximum graphics card memory	8 MB
Memory slots	8
Internal memory	2 GB
Internal memory type	DDR2-SDRAM
Maximum internal memory	32 GB
Memory layout (slots x size)	2 x 1 GB
Networking features	Ethernet/Fast Ethernet/Gigabit Ethernet
Expansion slots	1 x PCIe x8, 2 x PCIe x4, 2 x PCI-X
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	56 dB
Chassis type	Rack (2U)
Compatible operating systems	Windows Server 2003, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, VMware ESX
I/O ports	8 x SAS
Power supply	600 W
Power requirements	100 - 240V, 50/60 Hz
Operating temperature (T-T)	10 - 35 °C
Safety	IEC 60950-1, EN 60950-1
Electromagnetic compatibility	EN 55 022 A, EN 55024, EN 61000-3-2 / -3-3
RAID levels	1, 5, 10, 50
Processor ARK ID	27213

Weight and Dimensions

Depth	785 mm
Width	483 mm
Height	86 mm
Weight	25000 g