124
3. When you want to change settings on the [Scan2Print] action, click the [Application
Settings] button, and then change settings.
(When you do not want to change settings, go to Step 5.)
⇒ The following dialog box appears.
In this dialog box, you can change settings on the [Scan2Print] action as follows:
[Keep data used for printing as files] checkbox
Printed document images are saved in PDF format.
PDF files are saved in a folder specified in the [Image saving folder] drop-down
list on the "[Save] tab" (page 54) of the [ScanSnap Manager - Scan and Save
Settings] dialog box.
[Show "Print" dialog] checkbox
A preview window appears before printing images.
4. Click the [OK] button.
⇒ The [Scan2Print - Options] dialog box is closed.
5. Click the [OK] button.
⇒ The [ScanSnap Manager -Scan and Save Settings] dialog box is closed.
HINT
Changes you have made in the above procedure take effect from the next time
you scan documents using the Left-Click Menu.
For details on how to change settings, refer to section "4.3 Saving Scanning
Settings" (page 70).
To Next Page
Loading...
