33
The items in the Setting window work as follows:
VDR System Program: Display the VDR system program no.
Process Version: Display the process version.
Power Distribution Unit (PDU): Display the version no. of the PDU.
Operation System: Display the version no. of the OS.
Audio Driver: Display the version no. of the audio driver.
RAP Version: Enter the version no. of the RAP.
AP Version: Enter the version no. of the AP.
JB1-8 Boot Program: Display the no. of the RJB Boot program for Junction Boxes
1 to 8.
JB1-8 App Program: Display the no. of the RJB App program for Junction Boxes
1 to 8.
Watch Dog Interval: Do not change the default value of 60. (Enter the process
response time. A process is repeated if there is no response
within the time interval set here.)
Giveup Interval: Do not change the default value of 300. (Enter the restart
watch time. The restarting of a process is stopped when the
number of times it has been restarted is exceeded within the
interval set here.)
Refork Limit: Do not change the default value of 10. (Enter the upper limit
for process restart. The restarting of a process is stopped
when the number of times it has been restarted exceeds the
Give up Interval.)
Note*: Enter note.
*Marked Items are optional
To Next Page
Loading...
