Garmin GPSMAP 696 - Page 181

Garmin GPSMAP 695/696 Owner’s Manual
190-00919-00 Rev. G
165
Hazard Avoidance
Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices Index
The TargetTrend look-ahead time interval is automatically adjusted from 30 seconds to
five minutes and corresponds to the traffic display range setting. The greater the range
setting, the longer the time interval and vise versa. Refer to the table below for more
details.
Traffic Page Range Ring Settings TargetTrend Look-ahead
.5nm to 2nm 30 seconds
2nm to 6nm 60 seconds
6nm to 12nm 2 minutes
12nm to 40nm 5 minutes
TragetTrend Look-ahead
Motion vector selection is made from the Traffic Page Menu by enabling/disabling
TargetTrend. Absolute vectors are selected by default and are replaced when TargetTrend
is enabled.
Enabling/Disabling TargetTrend:
On the Traffic Page, press the TREND Softkey.