GE Security Vigilant VS1 User Manual

Chapter 2: Front panel programming
Vigilant VS1 and VS2 Technical Reference Manual 37
• Event notification
Trouble > Printer: Yes
Trouble > Dialer: Acct 1
Trouble > NET: Yes
Trouble > CID: 321 (NAC1), 322 (NAC2), 326
(NAC3), 327 (NAC4)
Disable > Printer: Yes
Disable > Dialer: Acct 1
Disable > NET: Yes
Disable > CID: 521 (NAC1), 522 (NAC2), 526 (NAC3),
527 (NAC4)
Test > Printer: Yes
Test > Dialer: Acct 1
Test > NET: Yes
Test > CID: 600
• Annunciator class: Class B
• Annunciators
Type: Off
Number expanders: None
Event notification
Trouble > Printer: Yes
Trouble > Dialer: Acct 1
Trouble > NET: Yes
Trouble > CID: 334
• Swinger shutdown: Off
• CMS device
Dialer
Type: Dual line
Acct 1 and 2
Account ID: FFFF
Primary receiver #: Blank
Secondary receiver #: Blank
Format: CID
Line 1 and 2
Dialing: Tone
Cut Duration/supervision: 120 sec.
Tone wait: 10 seconds
Call disconnect seconds: Off
Test frequency days: 1
Send restorals: Yes
Retry time: 5 seconds
Retry count: 5
Event notification: Device
Test time: 03:11
Rings to answer: 5
Ring type: Any
Callback: Disabled
Callback #: Blank
• Printer
Type: Unsupervised
Event notification
Trouble > Printer: Yes
Trouble > Coder: 00-00-00-00
Trouble > Dialer: Acct 1
Trouble > NET: Yes
Trouble > CID: 336
• Lock remote read: No
• AC voltage: 120
• Network (receiver)
Enabled: No
Account ID: FFFF
IP: 192.168.1.254
TCP/IP port: 9999
Send restorals: Yes
Event notification: Device
Hello time: 25
Timeout: 40
Receiver #: 2
Line #: 2

GE Security Vigilant VS1 Specifications

General

Brand	GE Security
Model	Vigilant VS1
Category	Control Panel
Language	English