Troubleshooting: Wireless LAN
2000966-542D Dash 3000/4000/5000 6-29
Analyze WIRELESS LAN STATUS screen
Display the WIRELESS LAN STATUS screen by entering Service
Mode (see “Access Service Mode” on page 6-25) and selecting MONITOR
SETTINGS > WIRELESS LAN STATUS.
The WIRELESS LAN STATUS screen displays the same information as
the WIRELESS LAN ID field along with advanced status fields.
Personnel with specialized training (hospital IT or network engineer) can
interpret this information.
1. Check that the information updates every 4 seconds indicating
communication.
2. Check for the following status information:
3. If the ASSOCIATION status in the WIRELESS LAN STATUS
window is other than CONNECTED, see “Confirm or configure
wireless LAN” on page 4-14 to check if the wireless feature is
enabled.
Contact GE Technical Support for additional assistance.
ASSOCIATION CONNECTED
TRANSMIT RATE Greater than 5.5 Mbit
PERCENT CRC ERRORS 00
TRANSMIT FAILURES 00000
945A
Check these
values to
determine network
communication
Check this value
to determine if
wireless is
enabled
To Next Page
Loading...
Need help?
General