Installation: Inspection
2000966-542D Dash 3000/4000/5000 3-3
Inspection
Inspect the equipment and its components carefully prior to installation.
Do not use the equipment if damage is determined. Refer damaged
equipment to qualified service personnel.
1. Inspect the case for cracks or other physical damage to the case, the
display screen, and the keypad.
2. Inspect cables for fraying or other damage.
3. Inspect all plugs and connectors for bent pins or other damage.
4. Inspect the display face for marks, scratches, or other damage.
NOTE
Physical damage to the flat panel display glass may pose an
implosion hazard.
5. Safety labels and inscription on the device are legible.
NOTE
Damaged cables or equipment should be replaced by service
personnel.
To Next Page
Loading...
Need help?
General