Network troubleshooting: Network infrastructure compatibility
B-4 Dash 3000/4000/5000 2000966-542D
e. Select RETURN.
f. When the CONFIGURE WIRELESS LAN window is removed
from the display, power cycle the Dash monitor to apply the new
setting.
GE recommends that you do not modify the design of the wireless LAN
infrastructure without verifying network infrastructure compatibility,
design, and configuration. Examples of design modification include but
are not limited to changing access point models, updating firmware of
existing access points, or adding new wireless devices to the network. If
you choose to modify the design of the wireless network infrastructure,
pre Go-Live compatibility and configuration testing is strongly
recommended and generally accepted as best practice as reflected in
industry white papers, such as the WiFi Alliance WiFi™ in Healthcare
paper. This is consistent with recommendations found in IEC80001-1
Application of risk management for IT-networks incorporating medical
devices.
To Next Page
Loading...
Need help?
General