GE LOGIQ e Basic Service Manual

System Setup
3-28 LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6
External Display Configuration
Connect the external monitor to the system. The monitor can be
properly connected using the HDMI port.
1. Connect HDMI cable to the system and the external monitor.
2. Press Ctrl+Alt+V on the keyboard of the system, a dialog
box appears on the screen.
3. Select Clone Displays in the menu list of Operating Mode.

GE LOGIQ e Specifications

General

Brand	GE
Model	LOGIQ e
Category	Medical Equipment
Language	English