General procedures
LOGIQ e – Basic Service Manual 4-9
5461614-100 English Rev. 6
Check System Date and Time
A warning message “Please check the system date and time are
correct” appears on the screen when the system is powered up.
This warning message appears for the possible reasons:
• The system is not boot up for more than 14 days.
• The system time has been changed by 24 hours earlier than
the current system time of last boot-up.
This warning message is to remind the user to check the system
date in case the system date and time is incorrect.
Figure 4-3. Check system date and time message
To Next Page
Loading...
