Loading the software
LOGIQ e – Basic Service Manual 8-19
5461614-100 English Rev. 6
Loading the System Software with USB memory stick (continued)
7. System USB memory stick will be loading. Wait for the
software installation to complete. (Typical installation time:
5-10 minutes). Status bar on the screen indicates progress.
Figure 8-4. Loading status
8. After finish updating system, remove the USB memory stick
and press any key to shut down the system.
NOTE: If you don not remove the USB memory stick, the software
system loading process repeats when the system boots up.
Figure 8-5. System upgrade complete
WARNING
Do not interrupt the software loading at any time.
To Next Page
Loading...
